Production Description
Reinforced Aluminum Foil Tape is aluminum foil laminating polyethylene mesh as backing, coated with acrylic adhesive and protected by easy release liner.
Features
1. Excellent Peel Adhesion
2. Good Initial Tack
3. Permanent Bonding
4. Tear-by-hand
Applications
Specially designed for sealing insulation joints and seams against moisture and vapor on PE mesh aluminun jacketing.
Technical Data Sheet
|
Property |
Unit |
Value |
Test Method |
|
Backing Thickness |
Micron |
130 |
PSTC-33 / ASTM D3652 |
|
Peel Adhesion |
N/25mm |
15 |
PSTC-1 / ASTM D3330 |
|
Tack Rolling Ball |
cm |
5 |
PSTC-6 / ASTM D3121 |
|
Tensile Strength |
N/25mm |
40 |
PSTC-31 / ASTM D3759 |
|
Elongation |
% |
8 |
PSTC-31 / ASTM D3759 |
|
Service Temperature |
°C |
-20 ~ +120 |
---------- |
|
Applying Temperature |
°C |
-5 ~ +40 |
---------- |
Cut Roll: 48mm, 50mm (2"), 60mm, 63mm (2.5"), 72mm, 75mm (3"), 96mm, 100mm (4").
Jumbo Roll: 1200mm x 850M, 1200mm x 750M.
Remarks
1. The data above are typical results and subject to change without notice.
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll: ±0.3m, Jumbo Roll ±0.5%.
3. The product should be stored at room temperature and kept from wet and heat source.
Shelf life: One year from shipment date when stored at 21°C (70°F) / 50% relative humidity out of direct sunlight.
4. It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.
5. The user should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for user’s special purpose and technique.
